Jump to content


Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Kenmore no spin cycle


  • Please log in to reply
4 replies to this topic

#1 rcarlso5

rcarlso5

    Unsui

  • Grasshoppah
  • Pip
  • 2 posts

Posted 02 April 2005 - 02:33 PM

Washer has all functions except spin cycle.  Lid switch is ok.  Jumped electrical connector for lid switch circut still no spin and had 120 volts.  Direct drive no belt.  Checked couppler on motor to transmission ok.

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,382 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 02 April 2005 - 02:35 PM

Do you hear any noise during the spin cycle or does the machine go eerily silent?

 


#3 rcarlso5

rcarlso5

    Unsui

  • Grasshoppah
  • Pip
  • 2 posts

Posted 02 April 2005 - 02:44 PM

The motor continues to run and it is pumping all the water out.

#4 Jedi Appliance Guy

Jedi Appliance Guy

    Senpai

  • Chief Appliantologist
  • PipPipPipPip
  • 701 posts

Posted 02 April 2005 - 04:01 PM

Next time it does this,  open the lid while it is running and pumping but not spinning.  Then close the lid.  If it starts spinning I'd say you need a timer.

#5 denrayr

denrayr

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 1,132 posts

Posted 02 April 2005 - 04:09 PM

[user=2]Jedi Appliance Guy[/user] wrote:

Next time it does this,  open the lid while it is running and pumping but not spinning.  Then close the lid.  If it starts spinning I'd say you need a timer.

 

if opening and closing the lid starts tub spinning it could also be a bad nuetral drain transmission.

rcarlso5: are you sure the coupler is good? sometimes the will split where they are pressed on and when trying to spin will slip.

RedRock Appliance Service

435-773-7838

www.redrockrepair.com

Serving St George and Southern Utah




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics