Loctite Freeze and ReleaseNew product
Posted 18 November 2012 - 09:04 AM
Posted 20 November 2012 - 07:09 PM
I normally carry with me threadlocker 292, wicking grade (usually light green or purple) - designed to run into threads without loosening and holds most of what I deal with around appliances. Pretty expensive stuff generally, around cars you sometimes need the high strength stuff.
Need parts? Call our Parts Department now! 877-803-7957
Posted 20 November 2012 - 09:57 PM
Same stuff I use
Just had an LG WM0642 washer tonight with a stripped ROTOR (no threadlocker visible on factory-installed 17mm bolt).
New ROTOR installed---and threadlocker (green color)---good as new.
FWIW---New ROTORS have been re-designed from having a plastic spline---to a steel spline (a bit overdue).
L-O-N-G cycle times
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
Posted 24 November 2012 - 09:49 AM
Former Student of Master Samurai Tech School. Current Student of Master Samurai Tech School
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users