Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
ChrisandCheryl

Maytag Bravos washer (MTW6600TQ0) noise

6 posts in this topic

Hello-the wife wanted me to call the Maytag man, but according to all those old commercials he off somewhere just sitting around...so I thought I would give it a shot (not my field though). Just reading around, it looked like a popular fix for the Bravos model (for noise complaints) was to replace the basket hub assembly. Which I did last night no luck) I also checked the suspension rods and all 4 rods look good and secure. I should have paid more attention to the noise it was making and how it was being generated, almost sounds like a coin or screw are stuck in the tub, and it would make the noise when spinning. However after further watching it go through the cycles - it doesn’t make the noise at the start of the wash when the machine first starts the rinse cycle and spins. Just an observation, but it only seems to act up when the washer is trying to remove the water...either spinning or not. I can email a short clip of it in action, hope it is recognizable. Any help would be appreciated. Thanks Chris.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

something stuck in the pump more than likely a coin you can go underneath and the pump comes apart

Share this post


Link to post
Share on other sites

I'll give it a try and let you know, thanks.

Share this post


Link to post
Share on other sites

Samurai Appliance Repair Man & Skiter29,

Just got through hooking up all the supply lines....I removed the pump and guess what fell out, just a penny. Not a nickel, dime, or quarter...just one cent. I should have gotten paid more than that. But hey thanks for the help. Chris

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites