Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag Neptune MAH4000 Replaced motor. Now it stops midcycle. Water in tub, top of clothes dry.


wsdad

Recommended Posts

Hello,

The washer stops with water in the tub.

The original complaint was that the washer was making a funny noise and not finishing the cycle. I observed the motor trying to start but then erratically changing directions, just for a split second, as it sped up. Also, the belt had fallen off. I found one of the windings on the motor had gone bad. I replaced the motor and the motor control board (it came with the motor). The belt looked OK so I reused it.

Now the lady says it stops midcycle with water in the tub but the top of the pile of clothes are dry, as if it hadn't tumbled them. She says it stops somewhere just after the Regular Light Tumble area of the dial - indicated by yellow in the attached diagram. When I got there, I found it had stopped in the red area with water sitting in the tub. It had been several hours, so all the clothes were damp to the top of the pile - no way to tell if they had been tumbled.

The motor tumbles and spins every time I test it.

Also tested:

Belt tension

Drain pump

Door switches and wax motor

Level switch, hose and bell

Wire routing and loose connections

Fill valves for seeping and adequate volume

Resister R11 on the machine control board in the console is not burnt.

Suds (motor has to turn to detect them).

Timer motor moves the dial every time it's on.

I'm out of ideas. Any help?

post-6041-0-30297700-1353417599_thumb.pn

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    2

  • wsdad

    2

  • Scottthewolf

    1

Top Posters In This Topic

Posted Images

  • Team Samurai

Belt falling off and noisy spin are telltale signs of bad drum bearings and/or broken drum support spider. Here's a simple test:

Link to comment
Share on other sites

The new problems are:

1. It has water left in the tub.

2. The lady says it stops midcycle and the top of the clothes in the tub are dry. I haven't been able to duplicate symptom #2 but she seems rational and I have no reason to believe otherwise. I have observed symptom #1.

Many thanks, oh great Fermented Grand Master. However, your humble servant would like to point out that the belt no longer falls off after replacing the motor, which was switching directions due to a bad winding. The tub was never the source of the noise. It was caused by the erratic motor. All weird noises have gone away after replacing the motor. Your humble servant begs forgiveness for not being clearer.

All that motor, belt and noise talk was just background history that may or may not be related.

The new problems are:

1. It has water left in the tub.

2. The lady says it stops midcycle and the top of the clothes in the tub are dry. I haven't been able to duplicate symptom #2 but she seems rational and I have no reason to believe otherwise. I have observed symptom #1.

Thank you for your further thoughts on the problem.

Link to comment
Share on other sites

  • Team Samurai

The new problems are:

1. It has water left in the tub.

Check for 120vac to the pump during the drain cycle. If present, then either gookus in the pump suction boot, jammed pump, bad pump, or clogged drain hose. If not, then track down the missing voltage.

2. The lady says it stops midcycle and the top of the clothes in the tub are dry. I haven't been able to duplicate symptom #2 but she seems rational and I have no reason to believe otherwise. I have observed symptom #1.

Customer problem descriptions are only useful in so far as they can be duplicated and witnessed by you.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...