12 replies to this topic

[dryerman45]

Dear Master,
I have a Ge washer mod# WLSR2000G2WW.It drains but doesnt spin.It just sits there unless you manually advance timer by 0ne or two clicks,then operates normally.TIMER?
Also the same matching GE dryer mod# DLLLR23EG0WW. It works fine on Manual timer select but auto dry runs for about 15 minutes then shuts off.Moisture sensor?
Please help
Thank you,
unsei

[dryerman45]

Samanera

• 
• Chief Apprentice Appliantologist
• 
• 5 posts

• Location: USA
• Flavorite Brew:rootbeer

Posted 21 November 2012 - 11:38 AM
Dear Master,
I have a Ge washer mod# WLSR2000G2WW.It drains but doesnt spin.It just sits there unless you manually advance timer by 0ne or two clicks,then operates normally.TIMER?
Also the same matching GE dryer mod# DLLLR23EG0WW. It works fine on Manual timer select but auto dry runs for about 15 minutes then shuts off.Moisture sensor?
Please help
Thank you,
unsei would someone please respond to this

[Samurai Appliance Repair Man]

Topics merged
 

Dear Master,
I have a Ge washer mod# WLSR2000G2WW.It drains but doesnt spin.It just sits there unless you manually advance timer by 0ne or two clicks,then operates normally.TIMER?

By "operates normally" after you manually advance the timer, do you mean that it will spin? If so, then it does sound like a dead spot in the timer ==> http://www.repaircli...er=WLSR2000G2WW

[Samurai Appliance Repair Man]

Also the same matching GE dryer mod# DLLLR23EG0WW. It works fine on Manual timer select but auto dry runs for about 15 minutes then shuts off.Moisture sensor?

Make sure both the elements are good. If one element is open it can cause this problem.

Element ==> http://www.repaircli...er=DLLLR23EG0WW

[dryerman45]

Thank you so much,
I will go back to this nice customer with these parts and will let you know what I find.

[dryerman45]

Dear Master,

Both elements are good.Have continuity on both and physically checked for breaks .Where do I go from here?

Thank you.

Samanera

PS the timer did correct the washer problem

[kdog]

Clean out blower housing and try drying a load with vent disconnected

[dryerman45]

HI,I have a GE dryer model#DLLLR23EG0WW.Works fine in timed dry,but stops when in auto dry after approx 15 minutes.I have checked both heater elements and they have continuity and are physically ok.Iam thinking the cycling thermostat may be the culprit,

Can anyone help that has seen this problem before.

Grateful,

SAMANERA

[kdog]

Topics merged

 

This Dryer ?

 

How did that test go with the vent disconnected ?

[dryerman45]

I am going back to the customers hoiuse tommorow I will let you know.I dont understand what good it will do because the unit works fine in the timed selection.May be you could help me understand

thank you

SAMANERA

[kdog]

works fine in the timed selection.

Duh, guess I missed that part, check TM-AD contacts on timer

 

This Manual should work

 

http://www.repaircli...er=DLLLR23EG0WW

 

 

[RegUS_PatOff]

... the unit works fine in the timed selection

does it actually dry the clothes within one hour ?

[dryerman45]

Yes it does dry the clothes in the timed selection.