Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 565.8824581 microwave

jb8103

By jb8103
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

jb8103 Senpai

jb8103

Posted
Posted

So it's actually a Sanyo. It's also just plain dead. Maybe that line fuse? I dunno, never have touched a microwave, but this belongs to my best client, can't say "no".

  • Like 1
Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • jb8103

    2

  • kdog

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

kdog
kdog

Could be one of the door switches stuck and caused the fuse to blow - helps if you shut off or use pause button when opening door as opposed to pulling open and having switches stop it. Always a good

jb8103
jb8103

So it's actually a Sanyo. It's also just plain dead. Maybe that line fuse? I dunno, never have touched a microwave, but this belongs to my best client, can't say "no".

jb8103
jb8103

Outstanding. As usual, Kdog!

kdog Sensei

kdog

Posted
Posted

Could be one of the door switches stuck and caused the fuse to blow - helps if you shut off or use pause button when opening door as opposed to pulling open and having switches stop it. Always a good idea to tape spare fuses inside cabinet while you have it apart (for next time).

M/W's are basically the same, here is a general diagnostic chart

  • Like 4
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...