I AM SERVICING A SAMSUNG MODEL # WF306LAW/XAA, IT WILL RUN NORMAL ON ALL CYCLES BUT WILL NOT SPIN THE CLOTHES OUT. THE PUMP IS CLEAR AND IT DOES PUMP ALL THE WATER OUT, ON SPIN ONLY IT WILL ROTATE APPROX 5 TURNS THEN CHIMES, THEN ROTATE IN THE OPPOSITE DIRECTION 5 TURNS AND CHIME AND CONTINUE.
I RAN A QUICK DIAGNOSIS FOR THE SPIN AND IT ONLY WILL REACH 200 RPM BEFORE IT SHUTS DOWN. ANY SUGGESTIONS, MAIN BOARD BLOWN? I DID REPLACE THE DOOR SWITCH ASSEMBLY.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
SAMSUNG FRONT LOAD WASHER WILL NOT SPIN
Started by refrigerationbob, Nov 27 2012 09:46 AM
2 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,721 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 27 November 2012 - 05:08 PM
Some other things to check: (from the service manual):
• Make sure to close the door completely.
• Perform Quick Test Mode or Quick Spin Test.
Does the washer spin? (Before the test, empty the unit inside.) If it doesn’t tumble after the above, change PCB. When the problem persists, change the motor.
• Perform Quick Test Mode or Quick Spin Test. Does the washer spin? If it does, Check Possible unbalanced load scenario in normal mode.
• Check for loose connections at PCB, Water Level Sensor, Motor, Hall Sensor Wire Harness. (CN8,CN9,CN3)
• Check motor windings resistance. (CN9 Pin1&3 = 11.6 ohms (at ±7% 20°C/68°F),
Pin1&2 = 11.6ohms (at ±7% 20°C), Pin2&3 = 11.6 ohms (at ±7% 20°C))
Service Manual ==> http://appliantology...service-manual/
Main control board ==> http://www.repaircli...er=WF306LAW XAA
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
refrigerationbob
-
- Chief Appliantologist
-
- 47 posts
Ikkō-ikki
Posted 30 November 2012 - 11:31 PM
PROBLEM SOLVED,
REPLACED THE MAIN BOARD AND CONTROL PANEL COMBO (PCM BOARD), UNIT IS RUNNING GREAT NOW.
- Samurai Appliance Repair Man and kdog like this
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
