Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Whirlpool Dryer with Odd Start Problem


  • Please log in to reply
8 replies to this topic

#1 Eliot Ness

Eliot Ness

    Samanera

  • Grasshoppah
  • Pip
  • 8 posts

Posted 28 November 2012 - 06:51 PM

The culprit is a Whirlpool WED5700SW0 "no frills" dryer. The wife reported that the dryer did not start when she hit the start button, but about a 1/2 hour later she heard it start. It has done the delayed start at least 3 or 4 times so far.

Since last night it's not really an "odd" problem since it hasn't started since.  I checked all the easy stuff like power, start switch, door switch, thermal fuse and cut-outs, so that leaves me with the timer, but I’m getting lost with all of the contacts on it. Thanks for any advice you guys might be able to offer!

 

EDIT:  I just found that the T & W contacts are not closing on the timer.  If I jumper them the dryer works; I guess I'll order a new timer.


Edited by Eliot Ness, 28 November 2012 - 08:00 PM.


Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 28 November 2012 - 07:23 PM

> When the dryer does not start the timer does not advance ...

Is this in Auto-Dry mode

OR Timed Dry mode ?

OR both ?


Need parts? Call our Parts Department now! 877-803-7957


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


#3 Eliot Ness

Eliot Ness

    Samanera

  • Grasshoppah
  • Pip
  • 8 posts

Posted 28 November 2012 - 07:45 PM

> When the dryer does not start the timer does not advance ...

Is this in Auto-Dry mode

OR Timed Dry mode ?

OR both ?

Both.  I edited my post to say I just found that the T & W contacts are not closing on the timer.  If I jumper them the dryer works; I guess I'll order a new timer. 

 

Thanks for the reply!


Edited by Eliot Ness, 28 November 2012 - 08:01 PM.


#4 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 28 November 2012 - 08:05 PM

http://www.repaircli...?R=154&N=921241

 

 

seems like a common problem recently:

http://appliantology...electric-dryer/


Need parts? Call our Parts Department now! 877-803-7957


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


#5 kdog

kdog

    RoughShod

  • Senior Appliantology Fellow
  • PipPipPipPipPip
  • 7,474 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 28 November 2012 - 08:08 PM

I can't seem to access the diagram at the moment, but in some cases, the T-W contact is cycled during the "wrinkle guard" portion of the program so that the motor will start and tumble a bit every few minutes.


Need parts? Call our Parts Department now! 877-803-7957


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


#6 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 28 November 2012 - 08:17 PM

here's one diagram

Wiring Sheet - 8576811.pdf


Need parts? Call our Parts Department now! 877-803-7957


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


#7 kdog

kdog

    RoughShod

  • Senior Appliantology Fellow
  • PipPipPipPipPip
  • 7,474 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 28 November 2012 - 08:22 PM

Is the timer closing BK-BU ??

 

Any chance the centre of the knob is stripped out giving the illusion you are on the cycle when you're not ??

 

One of the "frills" it appears to have is a wrinkle guard switch.

 

 

01277710.jpg


Need parts? Call our Parts Department now! 877-803-7957


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


#8 Eliot Ness

Eliot Ness

    Samanera

  • Grasshoppah
  • Pip
  • 8 posts

Posted 28 November 2012 - 10:33 PM

 T-W is used for everything except "end-of-cycle" and guard,

 

At which time the contact becomes "intermittent", thereby causing the motor to start up and tumble every few minutes



#9 certified tech group 51

certified tech group 51

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,687 posts
  • Location: USA

Posted 29 November 2012 - 11:05 AM

Just install a fixed jumper wire, you will not have  the 'wrinkle guard' option but you will not need to but a timer...........OR...  in the wire diagram the 'wrinkle guard' is a separate switch, p/n 3405157  just wired to the timer.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics