This is a #WM2101HW unit, leaks from the bottom of the door and down the front outside of the machine. The drain-back hose at the bottom of the door gasket was plugged with gookus and was holding water in the gasket. I removed the outer band clamp and pulled back the gasket to remove and clean the short hose that connects to the tub. Reassembled and it's still leaking. Gasket looks good(no tears, discoloration or distortions), but water is visibly leaking past the seal as it runs down the inside of the door lens. The thing drains properly and does not appear to be overfilling...the leak is splash water running down the inside of the door. It does this even with just a short rinse/spin cycle with no clothing.
What do you think? Do we just need a new door gasket, or is there perhaps an adjustment to the door that might be the cause?