This unit is a stacked washer/dryer. I need to replace the tub/door boot seal.
Question: Is it possible to replace the seal without un-stacking the dryer?
Thanks.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
5 replies to this topic
#1
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 29 November 2012 - 02:34 PM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 01 December 2012 - 03:00 PM
Anybody work on one of these before?
#3
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 12 December 2012 - 06:42 PM
This unit is an Allaince Washer/Dryer.
I recieved the seal today and the instructions mention using "special tool 318p4" to remove the dispenser drawer.
Of course that tool is not included in the kit.
Is anyone familiar with this? 
#4
RegUS_PatOff
-
- Grand Master Funk
-
- 30,698 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 12 December 2012 - 07:37 PM
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#5
eveready service
-
- Chief Appliantologist
-
- 45 posts
Ikkō-ikki
- Flavorite Brew:miller high life
Posted 12 December 2012 - 08:26 PM
not needed, use a flat tip screwdriver under the tab on the bottom of tray. remove retainer wire from seal with spring in slot on panel edge, screws from panel bottom,swing out carefully, unclip harness from panel top, rotate panel clockwise and set off to left side, now remove clamp from tub, older models will need to remove hose from valve on rear of soap tray, newer models have a worm clamp near the seal and don't come with the long hose, seal has a tab to locate in the 12 o'clock position (wetting the seal ) on tub and panel side will help with re-assy.
- Samurai Appliance Repair Man, kdog and prairiestr like this
#6
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 13 December 2012 - 12:56 AM
Reg and eveready,
Thanks for the info. I'll give it a try Monday. 
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
