Model #110.45862400 Getting F-6 Error code checked motor checked fine so i replaced motor control board ran a test washer checked good left the customer house she tried it now its doing the same thing the error code dosnt come on i put it in dignostics and it will run threw dignostics but when it comes for it to agititate or spin it dosnt do either and if i put it in drain and spin it will count down but tub dosnt move put it in wash it fill and tub wont move but clock will time down could have i gotten a bad new MCU or do i have a bad CCU
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
Kenmore Elite Front Load washer
Started by Skiter29, Dec 03 2012 12:43 PM
6 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
kdog
-
- Academy Fellow
-
- 7,433 posts
RoughShod
- Location: Canada
- Flavorite Brew:Dickens Cider
Posted 03 December 2012 - 02:56 PM
Loose terminal at motor connector ?
- Samurai Appliance Repair Man likes this
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
#3
nickfixit
-
- Academy Fellow
-
- 1,990 posts
Sensei
- Location: USA
- Flavorite Brew:Glen Livit
Posted 03 December 2012 - 02:58 PM
Broken wire where harness was wire-tied to MCU?
- Samurai Appliance Repair Man and kdog like this
" Giving numerical data to Sears management is like giving a monkey a machine gun. No one knows for certain what will happen, but you can be sure of two things... It will be real messy, and only the monkey will be unharmed"
#4
Skiter29
-
- Sublime Master of Appliantology
-
- 316 posts
Kohai
Posted 03 December 2012 - 04:56 PM
not a loose motor connection i checked that but i guess there could be a broken wire
#5
Skiter29
-
- Sublime Master of Appliantology
-
- 316 posts
Kohai
Posted 05 December 2012 - 12:37 PM
well this thing is driving me nuts i think i got a bad new mcu ive ohm out the windings they are good ohm out the tac test good i do have a spare motor so im gonna try that but it ohms out the same as the one on the machine
#7
Skiter29
-
- Sublime Master of Appliantology
-
- 316 posts
Kohai
Posted 05 December 2012 - 05:38 PM
door locks
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
