This old frig works except for the evap. fan. I measured what I thought was 120v and the motor but no spinny spinny. Found a replacement motor but the same thing. So checking further I find I do have 120v there but no neutral. I pull this beast away from the wall and find the wiring diagram. Turns out the neutral is switched at the defrost board. At least that's what it looks like to me. It seemed strange to me to have a fan controlled on the line and neutral side. I'm left assuming it's the defrost control causing the problem. Any thoughts.....?
Old Amana frid mod BB120TE Evap fan
Posted 05 December 2012 - 05:22 PM
Yes I saw that it could go through the termination stat and heater on the neutral side but it also connects to the defrost board. A service manual for this one would help.
Posted 05 December 2012 - 05:59 PM
Yes I saw that it could go through the termination stat and heater on the neutral side but it also connects to the defrost board.
connects to the Defrost Board, but not controlled by it ...
Neutral for the Evaporator Fan goes thru the Defrost Heater and the Defrost T'stat
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Posted 05 December 2012 - 08:07 PM
Thanks RegUS_PatOff, that's exactly the info I needed.
Posted 05 December 2012 - 10:20 PM
Also, after replacing the failed part, when plugged, in the fan will not start right away.........It needs the defrost terminator to close before the neutral side is completed..........................Been caught on this one once, you plug it in and the fan still does not start.. ........
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users