Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Refrigerator GFSF6KKYBBB


savondave

Recommended Posts

GE Refrigerator GFSF6KKYBBB french door control panel lights up & condencer motor runs but  no compressor. I need service manual & diagram

Link to comment
Share on other sites

GE Refrigerator GFSF6KKYBBB french door control panel lights up & condencer motor runs but  no compressor. I need service manual & diagram

 see if compressor is very hot and check relay/overload.   With regards to manual, I do not have that one either. Submit the request in the "service manual request" forum and one of the wizards here may provide it..

Edited by DurhamAppliance
Link to comment
Share on other sites

richseattle56

Remeber GE tried to sell the Major Appliance Division of the compamy about 6 years ago. But no one wanted it because GE wanted to keep the parts distribution portion of Major Appliances. Now they are trying to have other manufacturers, do that for them. Which is apperently working. Everyone knows that they make about 2000% on parts then they do on complete units. For example I did a call on a GE front load washer which was made by Frigidaire. Bad motor control board. I searched the parts of the west coast parts distributor. The Motor Control Board was $299 on this GE washer, but the local distributor did not stock it. I called them up and asked how I could get it. They told me that they only stocked the Frigidaire version of the same part which was manufactured by Frigidaire. Because the GE part cost $299 and the Frigidaire part cost $112. Go figure.

Edited by richseattle56
  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...