FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
Senpai
Posted 20 December 2012 - 10:02 PM
Small Coke refer does not cool. Compressor will kick on then click & go off. fans run continuously. Has a very small PTC relay & compacitor. A thermo protector is wired to the common terminal. I have 131 volts at the start terminal & 120V @ run terminal. I think that the start relay does not kick out & thus the thermo protector kicks out. After a few minutes compressor starts up again only to kick out. Am I correct in thinking this.
Is there a some where I can obtain a new relay for this unit?
IgonFishn & Tight Lines
Sensei
Posted 20 December 2012 - 11:02 PM
Danfoss 117U6102 PTC Starter Relay
http://www.gsistore.com/da11re1.html
parts manual
http://appliantology...ca-cola-cooler/
Senpai
Posted 21 December 2012 - 10:58 PM
Kool You The DUDE Reg. How you know that &/or find this stuff? Also is it too much to ask can I have the overload also? Thanks Patricio.
IgonFishn & Tight Lines
Sensei
Posted 22 December 2012 - 08:01 AM
a lot of searching and cross-referencing
PTC starting device ( Texas Instr. ) with reduced loss of energy 117U6102
PTC (alt) starting device (Siemens) with reduced loss of energy 117U6106
Protector (Texas Instruments) 117U3304
here's a few more files added
http://appliantology...oss-compressor/
Senpai
Posted 22 December 2012 - 09:32 AM
Man or man You da ONE. uno numeral One. Gracious, Merry Christmas, Felis Navidad. Hi, Domo.
IgonFishn & Tight Lines
Senpai
Posted 06 January 2013 - 12:50 PM
Finally received the relay on the 4Th. Them people are slow shippers. Installed the relay.
Compressor runs continuously now, does not kick out. Trouble is unit does not cool, therefore I have a sealed system failure. According to wiring diagram both fans are in parallel & are running, there is no defrost system to enter into the equation. Have to condemn. 
Bummer, Friends wanted to use cooler in their office.
Edited by Patricio, 06 January 2013 - 12:51 PM.
IgonFishn & Tight Lines
Sensei
Posted 06 January 2013 - 09:19 PM
Fix-it..........Try and find the leak, If you are just going to sh%$t can it, there are a few ways to salvage a leaking unit..............I got about 18 months on a evac/rechared system and it is still going. ( leak some where )..................It is just a shop refer, not for sale..... You could use a system sealer, ( Sorry Cactus Bob ).....to stop a small leak...................If it screws up the compressor, it don't matter cuz you were gonna chuck it any way..................
Edited by certified tech group 51, 06 January 2013 - 09:20 PM.
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
Community Forum Software by IP.Board
Licensed to: Samurai Appliance Repair Man
