Jump to content


Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

GE GG40T06AVG01 pilot lights but larger burner never starts.


  • Please log in to reply
1 reply to this topic

#1 Michael Sandifer

Michael Sandifer

    Ikkō-ikki

  • Grasshoppah
  • PipPip
  • 21 posts

Posted 31 December 2012 - 09:36 AM

GE GG40T06AVG01 pilot lights but larger burner never starts. Wondering where to start on this one. The heater has been sitting not used for the last 7 months. I can light the pilot but the heater never kicks on. Is there an easy fix. Also this unit has SMART SHIELD.  Any suggestions would be great.

 

Thanks



Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 jumptrout

jumptrout

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 1,380 posts
  • Location: USA
  • Flavorite Brew:Coors Light

Posted 31 December 2012 - 10:52 AM

 
Instructions
  • 1

    Avoid blocking the base of the GE water heater if the sensors do not seem to be functioning but the water heater has power. Keep the path of the sensor clean. The sensor is located under the sediment trap and the thermostatic gas valve. Make sure that the catch pan is out of the path of the flammable vapor sensor.

  • 2

    Wait 30 minutes or more if the SmartShield sensor system has activated before trying to reactivate power to the machine if the water heater shuts down automatically or the error light flashes seven times with a three-second pause. The wait time will allow the vapors to pass out of the system and from the cement around the water heater. Check for possible gasoline, paints, stains, solvents, bleach or other chemicals, cleaners or substances in the area that might trip the sensors, and remove them as needed. Turn the “On/Off” switch, which is located on the gas control valve, to turn the system back on.

  • Sponsored Links

  • 3

    Flush out the GE water heater system if the sensors are operating erratically. Lift up on the temperature pressure release valve handle, and let the water drain into a large bucket or open drain. Once several gallons have drained, close the temperature pressure valve and allow several hours for the tank to refill.

  • 4

    Contact GE to have the sensor replaced if errors continue when there are no chemicals or other vapors near the water heater, or the error flashes repeatedly.


Read more: How to Troubleshoot a GE SmartShield Sensor System | eHow.com http://www.ehow.com/...l#ixzz2Ge4NKEWt






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics