My Samsung belts didn't come today. I need one in the morning. Does anyone know if there is a substitute for a 6602-001655. I've done this before but I had to take belts out of bags to get the right length. If I could get just the length of that Samsung belt it would be helpful.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
6 replies to this topic
#1
SANTA
-
- Sublime Master of Appliantology
-
- 690 posts
Senpai
- Location: USA
- Flavorite Brew:Windsor/Molson
Posted 03 January 2013 - 05:29 PM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
sh2sh2
-
- Sublime Master of Appliantology
-
- 207 posts
Sōhei
- Location: USA
- Flavorite Brew:yeunling
Posted 03 January 2013 - 08:27 PM
Before i carried the Samsung belt i have used a Maytag(fsp) belt, forget what the part number is though. It may have been for the Samsung built Maytag dryer.
#3
john63
-
- Academy Fellow
-
- 1,411 posts
Sensei
Posted 03 January 2013 - 09:29 PM
The following DRUM BELT part numbers are good:
SAMSUNG: 6602-001314
WHIRLPOOL: W10205415
This part number *may* work as well:
MAYTAG: 35001137
Also...
If the DRUM BELT slipped off the MOTOR PULLEY---check the diameter of the Motor Pulley with a 22mm & 27mm socket.
If the Motor Pulley is 22mm---this was replaced with a larger 27mm pulley---to prevent the BELT from slipping off the pulley if the drum is rotated/turned (by hand) counter-clockwise.
27mm PULLEY: DC81-00220A
Edited by Samurai Appliance Repair Man, 04 January 2013 - 08:35 AM.
Added belt part links.
- Samurai Appliance Repair Man and kdog like this
To eliminate:
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
#4
SANTA
-
- Sublime Master of Appliantology
-
- 690 posts
Senpai
- Location: USA
- Flavorite Brew:Windsor/Molson
Posted 04 January 2013 - 01:26 AM
Thanks John. I guess I came up with the wrong part #. I read about the pulley problem and plan to check it out. The belt # I listed, 6602-001655. Is that an obsolete # or for a different model? Looks like I'll have 2 of those in stock. Did you notice the outrageous price for the Whirlpool belt?
#5
john63
-
- Academy Fellow
-
- 1,411 posts
Sensei
Posted 04 January 2013 - 01:48 AM
The 6602-001655 belt replaces the 6602-001314 belt (becomes frayed/damaged). But if you have one---can be used until the newer/Goodyear-made belt arrives.
Yes--crazy.
Whirlpool has adopted GEs astronomical replacement parts price structure.
I hope others don't follow suit.
- Samurai Appliance Repair Man and kdog like this
To eliminate:
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
#6
SANTA
-
- Sublime Master of Appliantology
-
- 690 posts
Senpai
- Location: USA
- Flavorite Brew:Windsor/Molson
Posted 04 January 2013 - 11:48 PM
Just a quick update. The belt was broken. I didn't have one of the above mentioned million dollar belts but I matched it up to a Whirlpool #40111201. Case closed.
http://www.repaircli...40111201/821089
- Samurai Appliance Repair Man and kdog like this
#7
john63
-
- Academy Fellow
-
- 1,411 posts
Sensei
Posted 05 January 2013 - 01:47 AM
<<< I matched it up to a Whirlpool #40111201>>>
******************
Good to know :)
- kdog likes this
To eliminate:
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
