Posted 19 January 2013 - 08:32 PM
Hmm, no trick that I can recall in getting the GITMO rails out, it was the putting them back in part that usually gives me fits. Next time I have one of these, I'll make a video that focuses just on removing and re-installing these rails and dedicate it to you.
Last few i did, i could not do the work around since the rails were not long enough to reach the back panel. Anyhow, i set the rails in place on the basket, slide the basket in, one rail goes in the slit easily the second one goes in with the help of a thin flathead
LAS purchased just for this purpose.
Edited by DurhamAppliance, 19 January 2013 - 08:35 PM.
Appliantology is, however appliances are not, an exact science for I know there are a few refrigerators that actually hate me.
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
