Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
senoiasummer

GE freestanding Oven Element Question

3 posts in this topic

I need understanding & wisdon on a GE freestanding Oven/Range, model number JBP78W0B1WW; SN AZ158672Q.

My wife called me in a panic this afternoon.  The lower (bake) element on the said range was sparking and on fire.   She turned the oven control to "OFF" and the element continued to spark and begin to flame.   She was quite panicked at this point and tried the fire extinguisher on the flame with no success.  Finally, she turned off the breaker which allowed for extinguishing of the sparks and flames.   When I arrived home I found that part of the element had broken off so that it was discontinuous.  

 

I read in the FAQs that both side of the element of energized when the element is on.   However I still have questions

 

Here are my questions

 

1) I am assuming that turning off the controls does not open the circuit on both sides of the element.  Is this correct?

2) Assuming #1 is correct, how was the part of the element that continued to spark and burn making the complete circuit?  Was it completing the circuit through the body of the oven?

3)  Assuming #1 is correct, does that mean that the element is (under normal circumstances) energized even when the control switch is off.  At least on one side of the element anyway?

4)  Assuming #3 is correct, is the element have an outter insulation .... it would have to be for safety sake, otherwise, at any point if you touched the element, even with the control off, you would get shocked, right?

5) Based on the above, is most likely the element the only thing that needs replacing?  Can someone please "link me" to the appropriate part?

 

Thanks!!

 

 

 

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

On many ranges, one side of the element is "hot" even when the controls are off.  Most of the time, even in spectacular fireworks cases like yours, the only thing you need to replace is the damage element.  Here's the replacement bake element for your range ==> http://www.repairclinic.com/PartDetail/Bake-Element/WB44T10011/820921?modelNumber=JBP78WB1WW

 

Bake-Element-WB44T10011-00966274.jpg

 

 

It's a plug and chug to replace.  Just be sure to unplug or cut the breaker first.  Here's a video that takes you through it step-by-step:

 

http://youtu.be/STZGDTXnwH8

Share this post


Link to post
Share on other sites

1) ... I am assuming that turning off the controls does not open the circuit on both sides of the element.

2) ... Was it completing the circuit through the body of the oven?

3) ... does that mean that the element is (under normal circumstances) energized even when the control switch is off.

4) ... the element have an outter insulation .

5) ... is most likely the element the only thing that needs replacing? 

1) correct, on some models

2) correct

3) correct, on some models

4) ... kind of .. ceramic

5) ... hopefully . but many times that "short to chassis" also takes out (a Relay on) the Controller ..

If the Oven doesn't work after replacing the Element, then

http://www.repairclinic.com/referral.asp?R=154&N=824274

Share this post


Link to post
Share on other sites