I removed the lid while adding fuse kit which comes with drain pump. Now Lid light stays lit, checked lid lock leads they appear to be secure. There no apparent other lose connections .. Any suggestions?
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Fisher & Paykel GWL11 lid fault wash won't start
#1
Posted 07 January 2013 - 03:32 PM
#2
Posted 08 January 2013 - 05:19 PM
Ohm out the lid lock wires from the control board with the lid closed. Should read nearly zero. Service manual here ==> http://appliantology...l-gwl11-washer/
- kdog likes this
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
Also tagged with one or more of these keywords: lid light lit, beeps
Appliantology Appliance Repair Forums →
The Laundry Appliance Repair Forum →
Frigidaire Dryer model LEQ1442ESO beeps then shuts off after about 20 seconds.Started by MikeandDori, 01 Apr 2012 |
|
|
||
Appliantology Appliance Repair Forums →
The Laundry Appliance Repair Forum →
Fisher paykel gwl10u2 washer stops and beeps constantly before rinse cycleStarted by Gramasue, 13 Mar 2012 |
|
|
||
Appliantology Appliance Repair Forums →
The Kitchen Appliance Repair Forum →
Maytag electric double wall oven MEW6630DDS is only beeping and not functioningStarted by lirachris, 01 Oct 2011 |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com













