Model #ID-31.3g At first this dryer would sometimes light initially and then go out very quickly or would not light at all. I replaced the gas valve because it sounded like the coils had become weak. I can now get it to light sometimes with a good flame and stay lit, but only sometimes. On the instances it does not light, the igniter will still spark, but will just not light and can't really smell much gas. Please if anybody has any ideas what is next to look for let me know.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
Commercial International Gas Dryer
Started by jkilgore34, Jan 08 2013 11:42 AM
2 replies to this topic
#1
jkilgore34
-
- Chief Appliantologist
-
- 118 posts
Sōhei
- Flavorite Brew:Dogfish Head 120 minute IPA
Posted 08 January 2013 - 11:42 AM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
jkilgore34
-
- Chief Appliantologist
-
- 118 posts
Sōhei
- Flavorite Brew:Dogfish Head 120 minute IPA
Posted 08 January 2013 - 01:59 PM
I adjusted the regulator now it seems to be fine.
- Samurai Appliance Repair Man and kdog like this
#3
pjv83
-
- Chief Appliantologist
-
- 13 posts
Samanera
- Location: USA
Posted 09 January 2013 - 11:46 PM
Did you take a reading for the gas pressure? what is it set at versus what should it be? If it lights and goes out, does it go out because the gas valve closes? what was the microamp reading on the flame sensor? Over-gassing an appliance only covers up an issue instead of rectifiying the problem, so it is important to make sure that low gas pressure was actually the problem.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
