Washer does not finish spin cycle. Control dial finishes but clothes are still more wet than normal. Little water in the bottom of drum (1-2 cups). What troubleshooting steps should I take to determine problem.
Troubleshoot Maytag Neptune Stack MLG2000AWW Won't finish spin cycle
Posted 08 January 2013 - 04:48 PM
Is the Drain clogged ?
Is the Pump clogged ?
Is the Pump Impeller damaged ?
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Posted 08 January 2013 - 07:02 PM
It runs a full cycle, fills with water, rinses fine so I suspect draining is not the issue. We ran a couple of cycles. This would rule out drain issue wouldn't it? I will check drain.
Posted 09 January 2013 - 06:20 AM
Check wax motor and spin enable micro switch, after verifing pump performance.
Posted 09 January 2013 - 05:51 PM
Unless you sit & watch the whole cycle YOU are doing allot of assuming. What is the brand? model number? maybe it never drains after wash?
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users