Can I use a 1/4" brass compression nut and brass feral to connect a 1/4" plastic water line to a ice maker water valve? Will it leak?
Is it acceptable to put a brass compression nut on 1/4" plastic line?
Posted 14 January 2013 - 01:15 AM
Not a good idea. It might work out ok but then it might not. I've repaired leaking water lines that were set up that way. Use plastic with plastic and brass with brass. From what I've observed, the brass feral doesn't seat right on the plastic tubing and can sometimes cut through the plastic.
- Samurai Appliance Repair Man, kdog and Chat_in_FL like this
Posted 14 January 2013 - 03:14 AM
Why not use one of these:
- Samurai Appliance Repair Man and jumptrout like this
Need parts? Call our Parts Department now! 877-803-7957
Posted 14 January 2013 - 06:35 AM
I think a better question would be whether it is recommended. A follow up question would be whether you have good insurance coverage.
Edited by DurhamAppliance, 14 January 2013 - 06:47 AM.
- Samurai Appliance Repair Man likes this
Durham Appliance Thrift & Repair, LLC
Posted 14 January 2013 - 06:50 AM
If you're going to use a brass nut and feral on a plastic water line you need the metal inserts that correspond to the size of the water line to keep the compression feral from crushing the plastic line.
- Samurai Appliance Repair Man, kdog, Chat_in_FL and 5 others like this
Willie's Budget Appliance Repair
Eureka, CA 95501
Posted 14 January 2013 - 07:28 AM
Glad I asked.
Is there a seperate part number for the plastic feral?
Is there a fitting that has the 1/4" compression on one end, and a quick connect on the other?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users