9 replies to this topic

[prairiestr]

Looking for a parts source for viking.

I need relay, "relay1" for right oven, located right front under oven door.

[Scottthewolf]

http://www.allvikingparts.com/

[Samurai Appliance Repair Man]

Do you mean you need the control board for the RH oven?  ==> http://bit.ly/VaWO1t

 

Or are you trying to replace just a relay on the control board?

[prairiestr]

Samurai,

The relay I need is not part of a control board, it is a dpst located under rh oven door. (relay 1 on wiring diagram)

There is a similar relay (relay 4) located under lh oven door.

 

Scott, thanks for the link.

[RegUS_PatOff]

do you have a part number ?

OR post a picture of the Relay ?

OR post wiring diagram ...

[Budget Appliance Repair]

Here's a Google Document file with some repair info and also list the relays and part#'s, covers VDSC dual fuel ranges and the VESO/VEDO single/double electric wall ovens.

See page 16 and 17 for the relay info.
https://docs.google....dit?pli=1&hl=en

Has lots of good info but not what I need on removing the door hinges in the VDSC ranges, includes wiring diagrams.

Edited by Budget Appliance Repair, 19 January 2013 - 08:17 AM.

[RegUS_PatOff]

you do the math

 

eBay # 200651270509 $ 54

[prairiestr]

Budget and Reg,
Thank you sooooo much for the info and your time.
Reg, stupid question here, i can only see 4 terminals on the Viking replacement and can't really tell on the Omron relay (although the diagram shows 6) can I assume there are 6 as on the original?
Also, is 12vdc correct?

Edited by prairiestr, 19 January 2013 - 03:44 PM.

[RegUS_PatOff]

... can I assume there are 6 as on the original?
Also, is 12vdc correct?

yes, 6 Terminals

(as shown in the eBay listing)

 

OOOooohhh..

should be 100v -120v AC

previous post edited

[prairiestr]

 Reg.
Thank you, Thank you.

Perfect.