Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool WED9270XW1


Patricio

Recommended Posts

Service manual request.  Ist time servicing this type of machine.  Clothes dripping wet, water running out of dryer vent.   Would like to know how this machine ticks.   Thanks mucho gracious.

Link to comment
Share on other sites

...  Clothes dripping wet, water running out of dryer vent.  

 

captbb756f9eacec45ffaf8.jpg

 

 

... looking for service manual ...

  • Like 2
Link to comment
Share on other sites

  • Team Samurai

There's a service bulletin out on this problem.  They don't list the W1 models as being affected but the affected production week is M124.  Can check that with the serial number.  

 

The cure they call for is replacing the main control board ==> http://www.repairclinic.com/PartDetail/Control-Board/W10405846/2116693?modelNumber=WED9270XW1

 

Control-Board-W10405846-01313117.jpg

 

 

 

http://appliantology.org/files/file/544-whirlpool-service-update-horizon-next-generation-steam-dryer-filling-with-water/

  • Like 1
Link to comment
Share on other sites

Talked to potential customer, gave him 3 senerios.

1. Plugged vent, says it is clean straight shot,

2. valve stuck, said to observe with no clothes in it, does it fill with water after sitting idle,

3. bad control board,

 

Also rough park figured cost for each repair...said he would discuss with wife & get back to me...have not heard from him since. :wacko:

Link to comment
Share on other sites

×
×
  • Create New...