Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
AlexM

Miele D.W. Model# G832SCI, Froze water valve and what else?

3 posts in this topic

When I got to this Miele compact dishwasher it was already out of the hole, disconnected and there had been a flood from the water fill hose, fill valve is what I assume. I didn't re-hook everything up to test, the home owner said water was coming out the hose...

 

If I order the fill hose and fill valve do you think I will be covered on parts?  Do i need to flip this unit on its back to get access to water valve, is it labor intesive?

 

Never worked on a Miele.

post-71964-0-41525600-1358992881_thumb.j

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

When I got to this Miele compact dishwasher it was already out of the hole, disconnected and there had been a flood from the water fill hose, fill valve is what I assume. 

I didn't re-hook everything up to test.........

the home owner said water was coming out the hose......

 

1) If I order the fill hose and fill valve do you think I will be covered on parts?........

2) Do i need to flip this unit on its back to get access to water valve..........

3) is it labor intesive?........

 

Never worked on a Miele.

1) according to the homeowner. Only way to have known for sure would have been to hook it up and see for yourself.

 

2) No, but you can if it's more convenient.

 

3) no

Share this post


Link to post
Share on other sites

The fill hose/valve is all 1 part on these, the fill valve is actually on the far end of the hose - the wiring is enclosed in a conduit that runs back to the machine's drain pan Water Proof ass'y is their terminology for it - the valve is easily connected to any std 3/4" hose bib (same as garden hose). To replace it you just need to lay the machine on the side and remove the lower cover (any water in bottom will spill out).  Unusual to have that hose leak - more commonly is the drain hose to wear through.

Manual is here: http://appliantology.org/files/file/216-miele-g600-and-g800-series-electronic-dishwashers-service-manual/.

 

You have to call Miele to get parts.

Share this post


Link to post
Share on other sites