I am trying to figure out the cable assy on an old kenmore dryer. How do the plastic guides, cables and springs go together? There are holes in the door that look like they should have grommets but do'nt. I got it for 20.00 dollars and everything works good, except these. The cables and springs were missing. Any pictures would be appreciated. Thanks.
Kenmore dryer 110.76960130 cable assy.
Posted 31 January 2013 - 02:02 PM
Thanks jumptrout. It is hard to make out the way to install. It looks like there is a door cable guide and a guide. I think the guides probably go into the holes on the bulkhead of the dryer to keep the cables from catching when you open the doors. Just speculating. Thanks again.
Posted 31 January 2013 - 03:44 PM
Okay, here is where the suampman got off track. When I got the dryer there were no springs and one cutoff cable. I got the cables and springs and for some dumb reason thought the springs went to the bottom. Apparently they go to the top. Most of the dryer's springs that I have worked on go to the bottom. Not this one. Works good. Thanks.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users