14 replies to this topic

[rolandvz71]

Ok I know I am gonna get thrown under the bus about this washer, but the person I am fixing it for insists on me fixing their washer....so please re-frame from rock throwing......

 

I have this type of seal head.....I am trying to track down tub seal kit for this washer. The problem was a loud roaring spin cycle...shot bearing from a leaking tub seal.

 

Now I have notice these washers come in two types of seal heads......one solid piece w/a triangle housing (what I have) for the bearing and the other is open style #11 on the B&W pic.....I need the seal for the triangle housing solid piece

 

Just need help in the right direction....thx!

 

 

Attached Files

•  IMAG0895.jpg   136.38K   12 downloads
•  SAV405DEWW (Tub, Inner & Outer (series 12)).gif   187.11K   14 downloads

[RegUS_PatOff]

you have this one ?

 
http://www.repaircli...R=154&N=1258432

 

 
16025947.pdf
and these instructions may also apply to your model
16023368.pdf

[rolandvz71]

OK I have the parts on hand that you posted....but looks like they will not fit my application. If I install the seal mentioned above then I will have 3 bearings installed....this does not seem right...

 

1 inside the tub, 1 on the seal head and another on the tranny...

Attached Files

•  Tub Seal.jpg   98.36K   16 downloads
•  Seal and yoke.jpg   86.11K   11 downloads
•  IMG_9379.JPG   46.44K   11 downloads
•  IMG_9380.JPG   48.09K   8 downloads

Edited by rolandvz71, 01 February 2013 - 10:36 PM.

[rolandvz71]

more pics

Attached Files

•  IMG_9378.JPG   83.79K   8 downloads
•  IMG_9381.JPG   33.51K   7 downloads

Edited by rolandvz71, 01 February 2013 - 10:38 PM.

[rolandvz71]

If I cant find a seal then my last resort is cut the seal head over to the 1st lip to match the one in the diagram....if I do that then the bearing may not seat up w/the tranny......

[rolandvz71]

 Would this be the kit? Looks a little different than post #2

 

http://www.repaircli...mber=SAV405DAWW

[tpoindexter]

There's 2 to choose from. I'm assuming that's why RegUS ask in post #2 "is this the one?"

And then, pasted the picture. You'll have to choose which you have.

 

W10116790

 

W10116791

Edited by tpoindexter, 02 February 2013 - 01:02 AM.

[rolandvz71]

There's 2 to choose from. I'm assuming that's why RegUS ask in post #2 "is this the one?"

And then, pasted the picture. You'll have to choose which you have.

 

W10116790

 

W10116791

Looks like what I need is the top pic....I already have the bottom kit and it will not work

Edited by rolandvz71, 02 February 2013 - 11:11 AM.

[RegUS_PatOff]

There's 2 to choose from...

series (serial number) dependent

[rolandvz71]

serial # 14126313GC

[RegUS_PatOff]

serial # 14126313GC

that would seem to be series 14 and above ...

[rolandvz71]

So process of elimination would be tub seal kit # W10116790

[Samurai Appliance Repair Man]

Tub seal and bearing kit ==> http://www.repaircli...0116790/1256957

 

 

[rolandvz71]

thx for all the help I was able to get her up and running!

[Samurai Appliance Repair Man]

Thanks for letting us know how it turned out!