Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

AlexM

Jenn-Air Range Model# W30100B, F-2 code and beeping.

4 posts in this topic

The cleaning people use the self clean on this a lot, and I suspect the F-2 code and beeping sound is due to a bad Thermal Fuse?  I'm having trouble finding the fuse, would it be P/N 71001844 ? or could it be a control board?  Thanks,

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

F2= Over temperature sensed. Over 620F. Check sensor. If OK, Replace Power Relay Board.

Edited by Chat_in_FL

Share this post


Link to post
Share on other sites

on any brand ...

each time you use self-clean, the heat puts a stress on everything ....

Running Your Oven's Self-Clean Could Mean Cold Turkey on Thanksgiving Day

:nono:

“My Rules”:

Rule #1) Don't ever use Self-Clean on any Oven.

Rule #2) If you're thinking about using Self-Clean, see rule #1.

Self-Clean uses nearly 1000F for 3 hours or more. burnin.gif

That can wreak havoc on Electronic Controllers and Connections.

FAULT CODES . . . . PROBLEM . . . COMPONENTS TO CHECK

F1    Power to element relay activated J1, J2 wire harness connection to control shorted.

If during time of day display. checks ok, change control.

 

F2 Over temperature sensed  Ohm TEST SENSOR.   If checks ok, change control.

 

F3 Open sensor.   Ohm sensor.

F4 Shorted sensor.   Ohm sensor.

 

F5 Over temperature Ohm sensor.   Check connection of sensor wire harness.

 

F7 Shorted key Stuck Function Key on control.

 

F9 Door Code Check Latch Assembly.

 

For Models: W27100, W27200, W30100, WW27210, WM27260

(Oven Sensor Chart: Please refer to chart below)

Share this post


Link to post
Share on other sites