The cleaning people use the self clean on this a lot, and I suspect the F-2 code and beeping sound is due to a bad Thermal Fuse? I'm having trouble finding the fuse, would it be P/N 71001844 ? or could it be a control board? Thanks,
Jenn-Air Range Model# W30100B, F-2 code and beeping.
Posted 12 February 2013 - 08:28 PM
F2= Over temperature sensed. Over 620F. Check sensor. If OK, Replace Power Relay Board.
Edited by Chat_in_FL, 12 February 2013 - 08:30 PM.
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect or represent the views and opinions held by my employer. All data and information provided is for informational purposes only.
Posted 12 February 2013 - 10:51 PM
each time you use self-clean, the heat puts a stress on everything ....
Running Your Oven's Self-Clean Could Mean Cold Turkey on Thanksgiving Day
Rule #1) Don't ever use Self-Clean on any Oven.
Rule #2) If you're thinking about using Self-Clean, see rule #1.
Self-Clean uses nearly 1000F for 3 hours or more.
That can wreak havoc on Electronic Controllers and Connections.
FAULT CODES . . . . PROBLEM . . . COMPONENTS TO CHECK
F1 Power to element relay activated J1, J2 wire harness connection to control shorted.
If during time of day display. checks ok, change control.
F2 Over temperature sensed Ohm TEST SENSOR. If checks ok, change control.
F3 Open sensor. Ohm sensor.
F4 Shorted sensor. Ohm sensor.
F5 Over temperature Ohm sensor. Check connection of sensor wire harness.
F7 Shorted key Stuck Function Key on control.
F9 Door Code Check Latch Assembly.
For Models: W27100, W27200, W30100, WW27210, WM27260
(Oven Sensor Chart: Please refer to chart below)
- tpoindexter likes this
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users