FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Sōhei
Posted 14 February 2013 - 08:08 PM
Does anyone know how to make this icemaker harvest when it's warm? I've tried simulating the method for the GE electronic I/M with a switch: off for a while, turn on, hit the paddle three times. They seem to harvest after several minutes, not long enough to get cold though.
I need instant gratification, though, that my repair is complete. Anybody know the secret?
Your Sometimes-Lucid Host
Posted 14 February 2013 - 08:34 PM
To manually start a cycle, pull the rake arm forward as shown below:
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
Sōhei
Posted 15 February 2013 - 07:38 AM
OK, Thanks Samurai! That seems simple... and obvious enough.
Your Sometimes-Lucid Host
Posted 15 February 2013 - 07:41 AM
It's simple but definitely not obvious! I wouldn't have known to do that unless it was in the manual; it's kinda counter-intuitive given it's a fancy-pants electronic ice maker and the previous incarnation used a switch and paddle dance for manual harvest.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
Appliantology Appliance Repair Forums →
The Kitchen Appliance Repair Forum →
GE Profile Arctica freezer with bad WR30X10044 icemaker?Started by Nords, 19 Aug 2012  GE icemaker, Profile, harvest
|
|
|
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
Community Forum Software by IP.Board
Licensed to: Samurai Appliance Repair Man
