Amana ALW540RAW - top loader. This week's problem - it leaks during the spin cycle when a full load is run. It doesn't do it on a smaller load (when the water level is set below maximum). Thinking I was a genius, I replaced the tub cover gasket ( http://www.repaircli...40076601/550565 )- didn't help at all... No visible cracks in the tub or top. All the hoses are good and tight. Water appears to be coming from that area, although I'm going to take it apart (AGAIN - I can do this in my sleep now) and run a load with the front covers off. Any ideas? I didn't use any sealant / silicone when I put the gasket on. It went on real easy - didn't put up a fight at all... Thanks for any help.
Edited by bigbluediesel, 22 February 2013 - 07:53 PM.