Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Dishwasher PLD3465REC0 service manual request


Sunlight Appliance

Recommended Posts

Sunlight Appliance

Mod: pld3465rec0

 

Is this tech manual available?

 

Client has this dishwasher that is intermittently unresponsive at the touchpad and frequently shows "Er" and "PF."

 

Thank you

Link to comment
Share on other sites

  • Team Samurai

There's a service bulletin out on this problem:

 

FRIGIDAIRE DISHWASHER

Dishwasher Stops After Power Supply Interruption

 

 

Models: GLD3450RD, GLD3451RD, GSB6400ND, PLD3460RD, PLD3465RE,FDB2810LD.

 

Problem: Display showing a code of "EE".

 

Cause:There has been a momentary interruption in the power supply to the dishwasher.This causes the control to stop all of its operations and functions.

 

Solution: Shut off the power to the dishwasher for 5 seconds, then turn it back on. This will clear the control and a "PF" code should appear in the display. To check the control, select one of the wash cycles then press the start pad, the cycle shouldstart normally. If the "EE" code reappears, technicians are advised to replace the control. Very rarely will the control need replacing.

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...