Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

G.E. microwave.......JVM2070SH01

certified tech group 51

By certified tech group 51
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

certified tech group 51 Sensei

certified tech group 51

Posted
Posted

Just gotta figure out how to get the control panel off to check the light buttons.Has an motor drive door vent on top, don't wanna break it.........

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • certified tech group 51

    2

  • Samurai Appliance Repair Man

    1

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Popular Days

  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Howdy, CTG! I'm away from my desktop computer down here at the ASTI conference so I can't get you a manual right now. However, I am familiar with how to remove the top vent cover on this unit. If you look on the very top of the cabinets, you will see two or three Phillips screws that need to be removed. To remove the plastic that piece, slide slightly to the left and then pull out. This exposes the Phillips screw that you would remove to then undo and loosen the control panel.

Link to comment
Share on other sites
certified tech group 51 Sensei

certified tech group 51

Posted
  • Author
Posted

Thanks, got it....Sounds easy to get the vent off.... :rolleyes:

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...