Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

G.E. microwave.......JVM2070SH01


certified tech group 51

Recommended Posts

Just gotta figure out how to get the control panel off to check the light buttons.Has an motor drive door vent on top, don't wanna break it.........

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • certified tech group 51

    2

  • Samurai Appliance Repair Man

    1

  • RegUS_PatOff

    1

Popular Days

  • Team Samurai

Howdy, CTG! I'm away from my desktop computer down here at the ASTI conference so I can't get you a manual right now. However, I am familiar with how to remove the top vent cover on this unit. If you look on the very top of the cabinets, you will see two or three Phillips screws that need to be removed. To remove the plastic that piece, slide slightly to the left and then pull out. This exposes the Phillips screw that you would remove to then undo and loosen the control panel.

Link to comment
Share on other sites

Thanks, got it....Sounds easy to get the vent off.... :rolleyes:

Link to comment
Share on other sites

×
×
  • Create New...