Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Looking for Service Manual for Kenmore 795.78769.800 (LG)


Jedi Appliance Guy

Recommended Posts

The Freezer is on the bottom.  The ice maker and dispenser are on the left refrigerator door.  The dispenser recess cover is flat with the door.  There is no obvious place to pry anything with a screw driver or a putty knife. I ordered a chute door to correct the frosty chute but I can't figure out how that cover comes off without the risk of breaking or scratching something...

 

Many Thanks

 

Link to comment
Share on other sites

Until Sensei Reg comes along with the exact manual...this manual http://appliantology.org/files/file/340-kenmore-fridge-79571023010-made-by-lg/  has an illustration of how to remove the dispenser cover. The models referenced in that manual uses the same dispenser cover...check out page 10

  • Like 2
Link to comment
Share on other sites

Thanks both of you. It's exactly what I needed.  Seeing how this fridge is under service contract, and I'm the guy... It will be comforting to know the manual is sitting in my tab, the next time I go over there or encounter another one like it.

  • Like 1
Link to comment
Share on other sites

The Great Reg, god of all things electrical and service manual-ly(?).  Despite the wait, I knew he would come... I just knew it....

 

 

 

  • Like 2
Link to comment
Share on other sites

  • Team Samurai

I don't know how he does it!  it's his trade secret: converting Kenmore model numbers to their OEM equivalent.  

 

enhanced-buzz-32482-1300477713-25.jpg

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...