Hello! And eek.
GE Top-Loading Washer, about 2 years old, very heavy use.
My washer stopped putting out cold water a couple of days ago. Water flowed fine through both hoses, no problem, but only hot into the machine. No humming or noises at all when it was set to cold. I replaced the water intake valve this morning, and now suddenly the damn thing is working on the cold setting, but not hot! I was sure I must have switched the solenoids, so I opened it back up to check but no, they are both in the right place. I very gently jiggled all the connections I could see, to make sure the wires were all seated, and nothing seemed loose.
This machine has gone from dishonorable to malicious. Please have mercy on my ignorance.