Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service manual for KA KSCS25FVMK01 Ref anyone?


asteysn2

Recommended Posts

Hello everybody again from Southern Calif!

I have a customer that owns a Kitchenaid KSCS25FVMK01 refrigerator.

The ice dispenser isnt working. The chute opens and thats about all. He said her heard noises coming from the door before it completely stopped. The water works fine. Glad to see thay re-engineered the wiring going up into the door. I was expecting a bunch of broken wires there.

Does anybody have the service manual, because I don't know how to get to the auger motor.

 

Bob at Coastal appliances

Link to comment
Share on other sites

×
×
  • Create New...