Dual/tri level electric top burners
Posted 18 April 2013 - 02:19 AM
Specifically the temperature sensor thing?
Posted 18 April 2013 - 12:51 PM
Easiest thing to do is test the coils for continuity as shown in the video. If the coils have continuity and you're getting voltage to the element terminals, then the limiter is bad. If the limiter is bad, you have to replace the whole element because the limiter is not a separately replaceable part.
Posted 22 April 2013 - 01:55 AM
Since all of these smoothtop ranges and cooktops are a total pain in the ass to remove the top just to test the elements, I ALWAYS and I mean ALWAYS quote my customers for both the element and the infinite switch. It's just way too much effort to open the top just to test the element and find out you need to order it. Then you replace the element and find out you also need to order the infinite switch.
Posted 22 April 2013 - 05:27 AM
Most of the time it takes two screws to lift the glass top enough to test for voltage to the element, got 220-240volts and no heat, you don't need the switch.
Or to check the continuity of the element ribbons. If only one ribbon is out on the dual/tri element, it's most likely the element that is bad.
- Samurai Appliance Repair Man likes this
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect nor represent the views and opinions held by my employer. All data and information provided is for informational purposes only.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users