Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Magenta#90

Maytag Neptune TL FAV6800A

6 posts in this topic

Fills the first time, in rinse mode shows "NF" code, isn't filling the second time. Possible bad Control or Bad inlet valve or pressure switch any advice , thanks

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Possibly plugged screen in fill valve on the cold side. On warm wash it fills with hot water but rinse it usually only fills thru the cold side and you wont get any water. Select cold wash and see if you get any water to fill.

Share this post


Link to post
Share on other sites

Please move this to the laundry forum.  Seriously, is everybody that blind or do you guys really have washers and dryers in the kitchen?

Share this post


Link to post
Share on other sites

Topic moved.   :geek:

Share this post


Link to post
Share on other sites

also there is probably different valves depending on wash and rinse for the different dispensing systems

Share this post


Link to post
Share on other sites

also there is probably different valves depending on wash and rinse for the different dispensing systems

There are secondary valves for the bleach dispenser & the softener dispenser but they serve to divert a portion of the incoming flow to flush the dispenser cup, not all of the flow.  Majority of the fill flow always runs through the detergent dispenser.

Share this post


Link to post
Share on other sites