ge model WJRE5550K2WW
Posted 03 May 2013 - 02:09 PM
Posted 07 May 2013 - 05:58 PM
Thanks for your input.
I discovered the apron was bent.I let customer know and they seemed to be ok with bending the ears back.I let them know it could get worse over time.I noticed also that the shaking actually cause the lid actuator to go bad due to how there was not enough slacK between the harness and the switch.I did correct that so at least that wont happen again.Its running quieter but I still think that that model is pretty cheap.
Posted 07 May 2013 - 08:42 PM
Also make sure you check to make sure its actually agitating, not just moving the basket back and forth. What you are describing sounds like the mode shifter is bad. when that happens it just spins the basket back and forth, Ohm out the wires running to the shifter and check the motor for a 4 flash code
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users