Posted 05 May 2013 - 05:14 PM
I took the unit apart, and discovered that the macerator screen was clogged solid.
Probably clogged because the blade wasn't spinning. See if blade is attached to the plastic shaft, shouldn't spin freely on shaft.
If blade is attached to shaft, then see if shaft engages onto end of pump, pump should turn as you turn the blade when it is installed. If not, then you must replace the pump (see posts above).
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect or represent the views and opinions held by my employer. All data and information provided is for informational purposes only.