Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kitchenaid REF KBFA25ERSS01 service manual?


asteysn2

Recommended Posts

Kitchenaid REF KBFA25ERSS01 service manual?

 

Does anybody have one?

Troubleshooting a non responsive touchpad

 

Looking for the touchpad matrix for testing

 

Thanks All!

 

Bob

coastalappliances.com

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • asteysn2

    2

  • Samurai Appliance Repair Man

    1

  • RussTech

    1

Ok so the Tech Sheet I have... same as the one posted here. Problem is I cannot perform ANY tests as the touch pads are completely unresponsive. I tried the user interface / display board as well as the main control module to no avail. Now Im guessing that the actual touchpads are bad but since there is no matrix map for the touchpads I cant test the buttons for continuity. So I've ordered the 3rd item, the touchpad, hoping for the best.

Link to comment
Share on other sites

×
×
  • Create New...