Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Scotsman SCE275A-1G Bin Full light on


vee8power

Recommended Posts

Upon start up, all the lights on the controller light up and then go off except the "bin full" light stays on. When the freeze cycle starts, everything seems to function correctly; when the freeze cycle light stops flashing and is on steady, the compressor and fans start up and run for about twenty seconds. Then the machine shuts down with and the bin full indicator is still on.

I cleaned the sensors and followed the diagnostics on page 27 of this manual

http://appliantology.org/files/file/881-scotsman-sce275-ice-machine-service-manual/

With connecter 4 removed and a jumper wire in, the bin light stays on. I'm a little unsure as this procedure is for a continuous run condition. Does anybody have an opinion on which part to replace? The controller is $390. I want to be sure. Thanks. 

Link to comment
Share on other sites

The cube diverter between the ice coils may be out of position blocking the light.



If the diverter is OK,replace the bin full sensors.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

The diagnostic in the manual pointed me to the controller, and with no way to prove the sensors bad, I relied on Jumptrout' s advice. The bin senors did the trick :thanks: . There's a file from Scotsman that says this problem is rarely the controller. I uploaded it for all to peruse.

  • Like 1
Link to comment
Share on other sites

There is a control board tedt that bypasses the sensors.

If it works on bypass,you check for obstructions blocking the signal and or clean the eyes.

If both those efforts fail,you replace the sensors.

Glad you got it working.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...