Upon start up, all the lights on the controller light up and then go off except the "bin full" light stays on. When the freeze cycle starts, everything seems to function correctly; when the freeze cycle light stops flashing and is on steady, the compressor and fans start up and run for about twenty seconds. Then the machine shuts down with and the bin full indicator is still on.
I cleaned the sensors and followed the diagnostics on page 27 of this manual
With connecter 4 removed and a jumper wire in, the bin light stays on. I'm a little unsure as this procedure is for a continuous run condition. Does anybody have an opinion on which part to replace? The controller is $390. I want to be sure. Thanks.