Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
lewk

Wiring an overload relay kit - part # 12002794

4 posts in this topic

Hello!

 

OK, I just want to make sure I'm wiring this thing up correctly for a Maytag MTB2172HRB.  Can I just copy the wire orientation from the original relay?  I.e. if the blue wire's on top, it would be white wire in the bottom left, orange wire in the bottom right?  Does it really matter how the orange and white wires plug in?

 

Instructions make it sound like it's the other way around.  They also call for the white jumper wire to be installed on terminal #1 on the relay, but there really isn't a terminal #1, so there's nothing to connect to.   And I don't think I need the jumper, all connections are 1/4 on the wiring harness.  

 

Thanks in advance!

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

The instruction is wrong.The white wire goes on terminal 2 on the relay and plugs into a wire that has the 3/16 terminal.Blue wire goes on overload.Orange wire on terminal 3.Got to use jumper.

Share this post


Link to post
Share on other sites

Ah.  I see it now.  I had to order a new wiring harness as well, the relay failed with burn marks on the back of the unit and completely fried the orange wire close to the connector.  Looks to be the orange wire in the harness that has the 3/16 terminal.

 

Really appreciate the quick reply.

Share this post


Link to post
Share on other sites

Yea what ever the color of the 3/16 terminal wire was thats were the jumper goes.The other ends goes on terminal 2 on the relay.Crazy that the instruction are wrong.

Share this post


Link to post
Share on other sites