I'm hopefull, when I installed the jumper there was ice in the mold, it had been there all morning, it ejected it right away and refilled with water, it's freezing another batch right now so I'll see how long it takes to eject.
Kenmore Coldspot slow ice production
Posted 02 September 2013 - 02:11 PM
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
Posted 02 September 2013 - 06:22 PM
so far it's made more ice today than it has ever, bin is still not full, when it's full I'll remove the jumper
Posted 03 September 2013 - 09:54 AM
I pulled the jumper out last night at 11. The ice maker almost filled up the ice bucket this afternoon. I'm going to order the optic board since the maker is working with this jumper in place. I couldn't find any loose connects in the harness or on the board. I'm thinking the mico relay on the board is bad or something else in the optic portion of the board.
- DurhamAppliance likes this
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users