I have problem with viking range vdsc 5364 dss, when i turn on oven (bake or broilor or self cleaning) it works 3-5 sec and then turn off and light (oven) on the front panel flash 3 times. Can your help with this problem?
Viking vdsc 5364 dss
Posted 24 July 2013 - 10:02 PM
Posted 25 July 2013 - 07:07 AM
The LED error codes are displayed on the control panel using the cycle lights. Refer to the chart below to determine
the type of error that is being displayed. These error codes are for the 48" left oven and for the griddle.
Cycle light flashing
Model Header error. 3 flashes, then 4 seconds OFF
The header error is the jumper wire on the control. It is used to tell the board what model it's on.
Edited by Spannerwrench, 25 July 2013 - 07:11 AM.
- Samurai Appliance Repair Man and AigulU like this
"Suds are not good"
"They write directions for a reason"
"Make sure you're using it right before you say it's not working correctly"
"If if has a Diagnostic Test Cycle, Run it before and after you fix it!"
"Doing the same thing over and over again and expecting different results is insane"
"For every complex problem there is an answer that is clear, simple, and wrong."
"Occam's Razor 'the simplest answer is most often correct'"
Posted 03 June 2014 - 10:53 PM
Just searching the site, looking for answers to a similar problem, the last reply refers to a chart of error codes, but it longer appears in the post. Would it be possible to get it re-posted or added to the Downloads section?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users