Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE GSS201EPA SERVICE MANUAL NEEDED

philcheck

By philcheck
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

philcheck

philcheck

Posted
Posted

REF AIR DAMPER PROBLEMS==REF WARM FREZ OK PC,DAMPER AND THERMISTERS REPLACED..NO FROST BUILD UP ,GOOD FAN

Link to comment
Share on other sites
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • philcheck

    3

  • RegUS_PatOff

    2

  • Spannerwrench

    1

Popular Days

Top Posters In This Topic

Popular Days

RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

... PC, .... REPLACED.

did you cut the Thermistor wire in Pin 2 of J1, as mentioned in the MotherBoard installation instructions ?

What's the first (3) characters of the Fridge serial number ?

http://appliantology.org/files/file/267-ge-refrigerator-31-9071-arctica-knob-w-encoder-sxs/

Link to comment
Share on other sites
philcheck

philcheck

Posted
  • Author
Posted

THATS GOT TO BE IT....THE WORDING ON THE SHEET LEADS YOU TO BELIEVE THAT IT APPLIES ONLY TO "ALL BOTTOM FREEZER MODELS..WITH ENCODER MODELS WITH THE FOLLOWING SERIAL NUMBERS  ETC ETC ETC"  WHEN IN FACT ITS "ALL BOTTOM FREEZER MODELS  AND ALL OTHER ENCODERS MODELS WITH THE FOLLOWING SERIAL NUMBER"    UGH...DRIVES ME CRAZY!!! :woot:  :wacko:  :pint1:

Link to comment
Share on other sites
Spannerwrench Sensei

Spannerwrench

Posted
Posted (edited)

There's only one instance which there needs to wires cut.

If the refrigerator main board is mounted vertically (as shown below), AND there are wires in both

pin 1 and pin 2 of J1, Cut the wire in J1 pin 2.

Note: When cutting the wire, leave enough wire to reconnect if necessary!

Taken from this pointer.

https://www.dropbox.com/s/m7s72q1o46d47ix/Main%20Board%20Replacement%20Pin2%20cutting%20jumper%20wire%20clipped%20Gss22%20gss25%20hss22%20hss25.pdf

Edited by Spannerwrench
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...