Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE GSS201EPA SERVICE MANUAL NEEDED


philcheck

Recommended Posts

REF AIR DAMPER PROBLEMS==REF WARM FREZ OK PC,DAMPER AND THERMISTERS REPLACED..NO FROST BUILD UP ,GOOD FAN

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • philcheck

    3

  • RegUS_PatOff

    2

  • Spannerwrench

    1

Top Posters In This Topic

... PC, .... REPLACED.

did you cut the Thermistor wire in Pin 2 of J1, as mentioned in the MotherBoard installation instructions ?

What's the first (3) characters of the Fridge serial number ?

http://appliantology.org/files/file/267-ge-refrigerator-31-9071-arctica-knob-w-encoder-sxs/

Link to comment
Share on other sites

THATS GOT TO BE IT....THE WORDING ON THE SHEET LEADS YOU TO BELIEVE THAT IT APPLIES ONLY TO "ALL BOTTOM FREEZER MODELS..WITH ENCODER MODELS WITH THE FOLLOWING SERIAL NUMBERS  ETC ETC ETC"  WHEN IN FACT ITS "ALL BOTTOM FREEZER MODELS  AND ALL OTHER ENCODERS MODELS WITH THE FOLLOWING SERIAL NUMBER"    UGH...DRIVES ME CRAZY!!! :woot:  :wacko:  :pint1:

Link to comment
Share on other sites

There's only one instance which there needs to wires cut.

If the refrigerator main board is mounted vertically (as shown below), AND there are wires in both

pin 1 and pin 2 of J1, Cut the wire in J1 pin 2.

Note: When cutting the wire, leave enough wire to reconnect if necessary!

Taken from this pointer.

https://www.dropbox.com/s/m7s72q1o46d47ix/Main%20Board%20Replacement%20Pin2%20cutting%20jumper%20wire%20clipped%20Gss22%20gss25%20hss22%20hss25.pdf

Edited by Spannerwrench
Link to comment
Share on other sites


×
×
  • Create New...