I have a Bosco AS-1200 HD, and one of the beater spindles has dropped out. It looks an easy repair; the spindle has one flat, and a female thread at the top end. I just can't get the top cover off to re fit the spindle. I removed the retaining screws, but I'm foiled by the attachment blender drive shaft, which passes vertically through the top cover, with a soft moulded gear attached. The gear is bigger than the hole in the cover, and I can't see how to remove it. I'm in Australia; perhaps the brand is not known elsewhere, although it is imported. Any help at all would be great thanks.
Dismantle help needed for Bosco stand mixer
No replies to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!